Endotine TransBleph Device Selection
The first step in performing a direct brow lift using the Endotine TransBleph is deciding which device to use. There are two sizes of ENDOTINE TransBleph; the 3.0 and 3.5. This number refers to the length of the tines in mm and as a general rule the 3.5 should be used. The 3.0 should be used for patients with very thin tissue where palpability may be an issue.
Each box contains 1 device which is pre-loaded on a disposable insertion tool and a sterile, single use drill bit.
Ordering Codes
CFD-080-0177 | ENDOTINE TransBleph 3.0 |
CFD-080-0167 | ENDOTINE TransBleph 3.5 |
CFD-899-4000 | MicroAire Manual Surgical Drill |
To learn more about MicroAire's Aesthetic products, send an e-mail to mail@advantechsurgical.com or call 0845 130 5866.